PAC Machinery · Shrink and flow wrapping
PAC FW 650SI
Servo-driven inverted flow wrapper, with a bottom roll for soft or delicate products. The cross seal bar uses box motion to extend sealing time. It runs films and heat-sealable paper, including Fiberflex, subject to product and material compatibility.
Confirmed technical data
| Parameter | Official specification |
|---|---|
| Speed | Up to 80 packages/min |
| Cross seal bar | 13,75 pol. / 349 mm |
| Maximum height | 8 pol. / 203 mm |
| Maximum width | 12 pol. / 305 mm |
| Maximum material width | 29,5 pol. / 749 mm |
| Roll diameter | 13,75 pol. / 349 mm |
| Dimensions | 64 × 198 × 90 pol. / 1.626 × 5.029 × 2.286 mm |
| Electrical | 220 V, three-phase, 20 A |
| Compressed air | 90 psi at 5 CFM / approximately 6,2 bar at 142 L/min |
| Weight | 2.315 lb / approximately 1.050 kg |
| Interface | 7 pol. HMI, Panel PC, and 50-recipe memory |
| Safety | Interlocked guards, CE compliant design, and emergency stop |
- Parameter
- Speed
- Official specification
- Up to 80 packages/min
- Parameter
- Cross seal bar
- Official specification
- 13,75 pol. / 349 mm
- Parameter
- Maximum height
- Official specification
- 8 pol. / 203 mm
- Parameter
- Maximum width
- Official specification
- 12 pol. / 305 mm
- Parameter
- Maximum material width
- Official specification
- 29,5 pol. / 749 mm
- Parameter
- Roll diameter
- Official specification
- 13,75 pol. / 349 mm
- Parameter
- Dimensions
- Official specification
- 64 × 198 × 90 pol. / 1.626 × 5.029 × 2.286 mm
- Parameter
- Electrical
- Official specification
- 220 V, three-phase, 20 A
- Parameter
- Compressed air
- Official specification
- 90 psi at 5 CFM / approximately 6,2 bar at 142 L/min
- Parameter
- Weight
- Official specification
- 2.315 lb / approximately 1.050 kg
- Parameter
- Interface
- Official specification
- 7 pol. HMI, Panel PC, and 50-recipe memory
- Parameter
- Safety
- Official specification
- Interlocked guards, CE compliant design, and emergency stop
Source: www.pacmachinery.com · Retrieved on 2026-07-31
Actual throughput depends on product, material, operator, printing, peripherals and configuration.